1 Followers
26 Following
tipuselabsaae

Mingji Lab Products

Mingji Lab Products

The accessories can make the actual operation easier

For example, the BV240A model of Sansite can use foot switch and hand-held manipulator to control liquid suction. The form of the waste liquid bottle and the host: the basic laboratory waste liquid suction device host and waste liquid One bottle is only connected by a vacuum pump tube, which is relatively simple in structure and highly cost-effective; most models have a fixed bracket on the side of the host, and the waste liquid bottle can be loaded into the bracket. Serological Pipette Company Configuration of other accessories:

 

The accessories can make the actual operation easier: for example, the vacuum gauge and the vacuum regulating valve can observe the working status of the machine during the working process, and then adjust the suction speed according to the actual needs; water blocking filter The device can block the liquid 100%, completely solving the problem of waste liquid being sucked into the pump. 2. The configuration of the waste liquid bottle: the capacity and quantity of the waste liquid bottle will determine the total amount of waste liquid. For more product consultation and usage introduction of cell culture waste liquid suction pump, please refer to our website. 5. This design has obvious advantages and is convenient

 

When the whole machine moves, the waste liquid bottle is not easy to dump; the most advanced design at present is an integrated model, that is, there is a fixed seat in the middle of the body, and the waste liquid bottle is directly put into the fixed seat, except for the convenience of moving and the waste liquid bottle. Vacuum degree and suction rate: these are the core parameters of this instrument.

 

At this time, if the machine is still controlled to start and stop through the power switch on the host panel, the gloves will be contaminated.The cell waste liquid suction vacuum pump is a basic equipment that a biological laboratory must use in a clean room. The waste bottle on the side close to the vacuum pump can be used to hold waste liquid or as a buffer bottle to prevent back suction. Customers often have no way to start with many models when choosing.